I did something crazy…

I did something crazy, on purpose, just for you, so that I could share this learning experience. I will post this on the blog in a few days. Here we go:

Do you remember the two Spring Bling quilts I made for my class with MJ Kinman? The one on the left has turned-edge machine appliqué and I used glue to hold the seam allowances in place. I used SoftFuse for the large raw-edge applique shapes in the quilt on the right.

The fabric came from my stash and I prewashed all of it sometime in the past. There are a lot of hand dyes in these quilts and I didn’t test the fabric before making the quilts because I was lazy. The blue quilt really needed to be washed to get the glue out. The red quilt needed to be washed because I wanted to see how the SoftFuse would look after washing.

This is where the crazy starts…

I put the red quilt in my washer with 3 white dish towels (not good ones), 1 Color Catcher, and 1 TBLS of Orvus Paste (because I have a huge jar of it) and 3 teaspoons of Retayne mixed in water. I chose Retayne in the hopes that it would fix the dyes. It did not as you can see in the photo on the left.

TIP: Do not let the quilt dry at this point!
Wash #2: 2 Color Catchers, plus 1 TBLS Orvus Paste and 3 teaspoons of Synthrapol mixed in water, added to the washer, washing in hot water. The dark pink you see in the photo above, right, is one of the Color Catchers. I moved on to washes #3, #4, and #5 using the same washing products in hot water—the white fabric got cleaner with each wash.

Five washes had taken enough out of the quilt and the white looked good so I placed the quilt face up on towels on my table to dry. I checked it every 10-15 minuted to be sure none of the color was bleeding.

I was not done tempting fate…

The blue quilt still needed to be washed. This was harder for me because there is a lot more work in this one but, at this point, it felt like a science experiment. I used the same mix of Color Catchers, Orvus, and Synthrapol in hot water…

The Color Catchers picked up some dye but the fabrics all looked good. Amazing! I laid it on more towels next to the Sunrise quilt, kept an eye on both as they dried, and eventually turned a fan on them.

TIP: Do not re-use Color Catchers, even if they look white. The chemicals are gone.
Washing changed the quilts. The texture of the quilting is more prominent. Five washes in hot water had an effect on the colors in the red Sunrise Bling quilt, the colors in the blue quilt look about the same as they did before.

What are the important take-aways?

  • If you care deeply about the quilt you are making, test wash your fabrics before you begin!!!!
  • Do not start washing late in the day because it could take longer than you think.
  • Wash with Color Catchers and  Synthrapol. The instructions say to use hot water and it makes sense to do what they say works best. And use either Retro Wash, Orvus Paste, or All Free and Clear. You could also try Dawn liquid dish detergent but only use a very tiny bit in your washer. 
  • Do not let the quilt get dry when dye is running.
  • Do not put the quilt into the dryer until you are absolutely certain that colors are not running.
  • Remain calm.
  • Think carefully before you get a quilt wet. I was mentally prepared for the worst outcome so I forged just did it. If you are going to be heartbroken if disaster strikes, it might make sense to live with your quilt the way it is, unwashed.

But what about prewashing fabric?

I have been prewashing my fabric with Retro Wash, Retayne, and Color Catchers—but if the Color Catchers came out with color, I have not been rewashing the fabric. That is not smart and I’ll be washing until the Color Catchers come out clean from now on.

It’s possible that prewashing with Synthrapol rather than Retayne could be a good idea. I am going to think about it. And, from here on out, when using fabric that I know tends to bleed (like red hand dyed fabric!) I will test them before using them in a quilt.

I hope my experience helps you when you wash your next quilt :-).

18 thoughts on “I did something crazy…

  1. Thank you for sharing. I have always boiled my fabric since watching the experts on t v. People said it was too much. Now I hear from an expert and your experience. A little work before hand makes a world of difference. And thanks for the names of the washing products you use.

    Like

  2. Solid BLACK can bleed badly similar to RED. It gives the surrounding areas of fabric a dirty, dingy look (speaking from experience). First the RED started bleeding. I followed Suzy Quilts advice (similar to your advice) using very hot water and Dawn dish soap to soak for up to 10hr (yes, it takes a long time). Then after the water ran clear of Pink color, I washed in the machine with Retro, color catchers, & Retayne. Now the BLACK started to bleed. Blotches of gray dinge here and there over the entire 70×70” hand-quilted surface. My heart sank. Back to the soaking, etc., etc. Thankfully, all the bleeding came out and I was able to gift the quilt to my son.

    Like

  3. If the the fabric has not been prewashed or pretreated, and the potential for colors running or bleeding are such a concern, can the quilt be dry cleaned?

    Like

  4. Pingback: PREWASHED FABRICS STILL CAN RUN – Pinot and Piecing

  5. I’ve been there! With my hand-dyes and batiks, and also with a quilt top my mother completely hand sewed and appliqued without washing the fabrics first. What a disaster. I learned from Jamie Wallen at a workshop to soak the fabrics or quilt top (or quilt) in warm water and blue Dawn for three hours. I am a pre-washer, but I’ve had to save several quilts this way. I decided to soak all my hand-dyes and batiks. Doing them by color family it took a whole weekend, but I’m glad I did as the water (which I kept changing) came out like flavors of Koolaid.

    Like

  6. Thanks for sharing your experiment. So did you mix the synthrapol before hand in hot water before adding to washer? And how did the softfuse look/feel after 5 washings?

    Like

  7. Thanks for this information! I had a Christmas quilt that I hand sewed years ago on which one of the red fabrics bled. Every year when I take it out it makes me sad to see the pink areas that should be white. I will keep your post for future reference.

    Like

  8. I love both your designs. I pre-wash all reds along with any other fabric that is a deep color through out. I’m glad you were able to correct your stains.

    Like

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

This site uses Akismet to reduce spam. Learn how your comment data is processed.