Margaret Wild is the lucky winner this week! If you are not Margaret, you might want to actually buy your own Corner Cut tool :-). Here’s why: If your 1/4″ seam allowance is too big, or too small, you need a Corner Cut tool! It’s good for many things, not the least of which is checking your seam allowance. Here’s how it works:
And here’s a picture:
Piece O Cake Blog 
I would love to have this tool. It would make my piecing so much better and accurate.
LikeLike
This looks like an interesting tool! Thank you for this opportunity!
LikeLike
I just love to quilt. I’m a beginner but I’ve found my notch. I sure hope I win this giveaway. I’ve never won anything in my life and and I’m 62. Wouldn’t it be neat to win this.
LikeLike
This would be handy to have in my toolbox.
LikeLike
Aren’t you using the “scant” quarter inch measurement? I see the minus sign near the 1/4″.
LikeLike
I’d have to go back and look close and I don’t have time today. It may be the angle of the camera that’s making it look that way.
LikeLike
Me again. I did look and you are correct. I just went over to my machine and checked the true 1/4″ and it lines up exactly with the mark on the throat plate and the edge of the foot, with nothing sticking out beyond the edge of the foot. So the main point for me is to never let fabric stick out beyond the right side of the 1/4″ foot. I think that’s where a whole lot of quilters go astray.
LikeLike
Would love this for cutting those dog ears! 🐶
LikeLike
What a cute tool for corners and checking 1/4″ seams.
LikeLike
Thank you for the chance, and the tip.
LikeLike
Looks very useful!
LikeLike
What a great set of tools! Did you intend to say the drawing is March 1st?
LikeLike
It looks so interesting! Thanks.
LikeLike
Great tool
LikeLike
Count me in.
LikeLike
Handy tool!
LikeLike
All I want to do is applique
LikeLike
The video was very detailed and informative. Amazing how that little smidge of a difference could impact the precision of a block and eventually the whole quilt. Thank you for sharing and offering a chance to win.
LikeLike
I would love to have this tool.
LikeLike
I love good tools. 🙂
LikeLike
I would love to win and I’m looking forward to watching your YouTube video
LikeLike
The 1/4 seam allowance is so so important. So many tools to choice from. I did really like the You tube you shared on this morning’s post of the inner points. Lots of good tips!!!! Thank you!
LikeLike
This sure would improve and check anyone’s work!!
LikeLike
This tool looks like it would really help keep pieces in line. I think adding this tool would really help keep everything lined up. thanks for showing this as probably would not have even known it existed as our local shops do not carry lots of tools.
LikeLike
Becky,
That 1/4 inch is always hard for me. This would be a perfect fix.
I love your blog and the way you highlight certain tools. It’s such a good thing.
LikeLike
Definitely worth trying. We all have a few pieces at the end of chain piecing that see to go a bit off. Thanks for the neat demo too
LikeLike
Niffy tool. Great demo. Thank you for sharing and a chance to win.
LikeLike
I have so much trouble with 1/4 inch seams, and have most of gadgets to help with seams, maybe this one will do the trick.
LikeLike
I could find this to be a very handy tool!
LikeLike
What a great tool
LikeLike
The plague of fashion sewer turned Quilter…the 1/4 seam. I would love the tool because the question is do we sew a scant 1/4 inch to adjust for the thread, sew a true 1/4 inch and let the seam police fly a kite. Thanks Becky for all your help. You are still my hero. V.
LikeLike
I really need this tool, 1/4” is my biggest problem
LikeLike
What a great idea. I think I need this tool. Thanks for the chance to win.
LikeLike
What a great tool!!
LikeLike
I thought I had seen every tool there is, but this one is new to me! It looks very useful.
LikeLike
Boy, oh, boy, maybe this tool could help me! I seem to do okay until I get to the bottom, then I veer to the right. What’s up with that?
LikeLike
Awesome tool! Thanks, Becky!
LikeLike
I always love new sewing tools!
LikeLike
That sounds like a great tool
LikeLike
Thanks, Becky! I’ve been looking for something to use with my antique treadle machine and those strips look like what I need.
LikeLike
It looks like a very useful tool to get rid of the “dog ears”.
LikeLike
I would love this tool–thanks for the chance.
LikeLike
I would love to win this tool!
LikeLike
I could really use this!!!
LikeLike
I’m a hand piecer & would love this tool. Thx.
LikeLike
I need this!
LikeLike
Love this tool! Use it all the time!
LikeLike
What a neat looking tool, would love to try using it in my quilt making.
LikeLike
I keep hearing about this tool. Would like to try it! Thx for the chance.
LikeLike
Being new to quiltingit would be nice to win tools needed to get the job done🙂
LikeLike
Thank you for the demo! It looks very easy to add to a machine and improve the 1/4″ seam.
LikeLike
Can’t have too many tools! Thanks Becky!
LikeLike